Lights : Incandescent

< back

	My light is not working?
	How do I change my bulb?

My light is not working?

• Check the power supply; verify that the breaker in the breaker box and the light switch are in the on position, if all is okay, the bulb maybe blown.

How do I change my bulb?

• ALL POWER TO THE LIGHT MUST BE OFF.  This includes the circuit breaker and the light switch. Once the power is verified to be off, unscrew the light fixture from the niche. There should be a single mounting screw in the 12 o’clock position; loosen the screw and lift the light onto the pool deck. (When the light was first installed, the installer should have left excess cord).  Depending on the age of the light, there may be a clamp or a back securing ring with nuts holding the light onto the lens. Expose the bulb, unscrew and install the new bulb.
• NOTE:
  When replacing a bulb, you should replace the lens gasket, as a precaution. If you replace the bulb and the light continues not to work, your gasket might be bad. Lubricate the new lens gasket,
  resecure the lens and faceplate and secure into the niche.
  Hayward recommends you consult a licensed electrician for any electrical work.