Hayward Pool Products - Pool Safety Products - Public Pools

Suction Outlets & Fittings

WG1153AV Drain

WG1048E Drain Cover

Hayward covers safety with variety and style. New safety suction outlets meet all federal requirements.

For concrete or vinyl/fiberglass pools, Hayward NSF listed suction outlets are available in a wide range of styles and sizes to satisfy any installation requirement. Whether you install frame and covers, for residential or commercial pools, or sump-type outlets, Hayward suction outlets set the standard in quality and value.

Legislation leads to performance enhancements:
Two major changes in the pool industry address the enhanced performance requirements for pool safety.

The American Society of Mechanical Engineers (ASME) has released ANSI/ASME A112.19.8 – 2007 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas and Hot Tubs. The revisions for this standard include testing of outlet covers to prevent hair entanglement, body entrapment, and finger entrapment as well as improved Ultra Violet (UV) stability of outlet covers.
The Virginia Graeme Baker Pool and Spa Safety act promotes the safe use of pools, spas and hot tubs by imposing mandatory federal requirements for suction entrapment avoidance.

What do the mandatory federal requirements mean?
Specifically, the mandatory federal requirements are as follows:

Effective December 20, 2008 each swimming pool or spa drain cover manufactured, distributed or entered into commerce in the United States shall conform to the ANSI/ASME A112.19.8 2007 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas and Hot Tubs published by ASME. Compliance with this standard will be enforced by the CPSC as a consumer product safety rule.
Hayward WG Series Suction Outlet products comply with provisions of the ANSI/ASME A112.19.8 – 2007 standard and the Virginia Graeme Baker Pool and Spa Safety Act.

It is important to determine if a drain cover is compliant with the requirements.
Hayward drain covers compliant with the new standard will have ANSI/ASME embossment on each drain cover to indicate it is compliant.

	Warning! Read and follow all instructions.
	Product Notes
	Owner's Manual
	Technical Specifications

Warning! Read and follow all instructions.	Back to top

Failure to follow instructions can cause severe injury and/or death.
A minimum of two functioning suction outlets per pump must be installed. Suction outlets in the same plane (i.e. floor or wall), must be installed a minimum of three feet (3') [1 meter] apart, as measured from pipe center to pipe center.
Dual suction fittings shall be placed in such locations and distances to avoid "dual blockage" by a user.
Dual suction fittings shall not be located on seating areas or on the backrest for such seating areas.
The maximum system flow rate shall not exceed the flow rating of any listed (per ASME/ANSI A112.19.8-2007) suction outlet cover installed.
Never use Pool or Spa if any suction outlet component is damaged, broken, cracked, missing, or not securely attached.
Replace damaged, broken, cracked, missing or not securely attached suction outlet components immediately.
In addition, two or more suction outlets per pump installed in accordance with latest APSP, IAF Standards and CPSC guidelines, follow all National, State and Local codes applicable.

Product Notes	Back to top

NOTE: See "Guidelines for Addressing Entrapment Hazards with Pools and Spas," U.S. Consumer Product Safety Commission, Publication #363-009081, (301) 504-0400 or www.cpsc.gov/cpscpub/pubs/363.pdf.

Learn more about the Virginia Graeme Baker Pool and Spa Safety Act and the Stratum® VRS, an additional layer of protection.

Owner's Manual Back to top

These are currently the model numbers that we have manuals for in PDF form. We are adding to this list regularly. If you don't find your model number listed here, please try again at a later date.

   WG1030AVPAK2

   WG1032PAK2

   WG1033PAK2

   WG1048AVPAK2

   WG1049AVPAK2

   WG1051AVPAK2

   WG1052AVPAK2

   WG1053AVPAK2

   WG1054AVPAK2

   WG1153AVPAK2

   WG1154AVPAK2

Technical Specifications Back to top

Accessories
Model Number	Description	Ctn. Qty.	Ctn. Weight
WG1048EKIT	Brass insert and Screw Kit – Available for all covers	10	4 lbs.
WG1051X	Adjustable Plaster Collar (1") for concrete Suction Outlets	12	4 lbs.
SP1048AVH	Suction Outlet Bumper. Fits Hayward AV drains to keep automatic suction cleaners off drain cover	10	3 lbs.

Deluxe Suction Outlets with adjustable plaster collar (Concrete)
Model Number	Cover Dimension	Cover Open Area	Pipe Size Side Outlet	Pipe Size Bottom Plug	Ctn. Qty.	Ctn. Weight
WG1153AVPAK2	7 7/8" Dia.	8.1 in.²	1 1/2" FIP	2" FIP	6	32 lbs.
WG1154AVPAK2	7 7/8" Dia.	8.1 in.²	2" FIP	2" FIP	6	32 lbs.
NOTE: Includes NSF listed covers.

Frames and Covers (Concrete)
Model Number	Cover Dimension	Cover Open Area	Pipe Size Side Outlet	Pipe Size Bottom Plug	Ctn. Qty.	Ctn. Weight
WG1030AV*PAK2	7 7/8" Dia.	8.1 in.²	—	—	24	46 lbs.
WG1032PAK2	12" x 12"	32 in.²	—	—	4	47 lbs.
WG1033PAK2	18" x 18"	71.25 in.²	—	—	4	28 lbs.
*Available in gray and black. Add GR to model # for gray or BLK for black.

Relief Valve and Suction Outlet Collector Tube
Model Number	Description	Ctn. Qty.	Ctn. Weight
SP1056	1 1/2" MIP Hydrostatic Relief Valve, Spring-Loaded	25	6 lbs.
SP1056T	Installation and Removal Tool for SP1056, 1057	20	36 lbs.
SP1055	1 1/2"/2" FIP Collector (Pebble) Tube, 12" long-slotted	25	9 lbs.
WG1153B	Extension Collar with inserts	10	5 lbs.

Replacement Suction Outlet Covers
Model Number	Description	Cover Dimension	Cover Open Area	Ctn. Qty.	Ctn. Weight
WG1048E	Replacement Suction Outlet cover for 1050 series, 1150 series	7 7/8"	8.1"	10	5 lbs.
WG1048EW	Replacement Suction Outlet cover for wall installations	7 7/8"	8.1"	10	5 lbs.
WG1048E1	Machined Replacement Suction Outlet cover	7 7/8"	8.1"	10	5 lbs.
WGX1048EBLK	Replacement Suction Outlet cover only, black	7 7/8"	8.1"	10	5 lbs.
WGX1031B	Replacement 9 x 9" cover and frame	9" x 9"	17.81"	10	10 lbs.
WGX1032B	Replacement 12 x 12" cover and frame	12" x 12"	32.37"	10	10 lbs.

Suction Outlets (Concrete)
Model Number	Cover Dimension	Cover Open Area	Pipe Size Side Outlet	Pipe Size Bottom Plug	Ctn. Qty.	Ctn. Weight
WG1051AVPAK2	7 7/8" Dia.	8.1 in.²	1 1/2" FIP	1 1/2" FIP	6	35 lbs.
WG1052AVPAK2	7 7/8" Dia.	8.1 in.²	2" FIP	1 1/2" FIP	6	34 lbs.
WG1053AVPAK2	7 7/8" Dia.	8.1 in.²	1 1/2" FIP	2" FIP	6	32 lbs.
WG1054AVPAK2	7 7/8" Dia.	8.1 in.²	2" FIP	2" FIP	6	33 lbs.
NOTE: Includes NSF listed covers.

Suction Outlets (Vinyl/Fiberglass)
Model Number	Cover Dimension	Cover Open Area	Pipe Size Side Outlet	Pipe Size Bottom Plug	Ctn. Qty.	Ctn. Weight
WG1048AVPAK2	7 7/8" Dia.	8.1 in.²	1 1/2" FIP	1 1/2" FIP	6	37 lbs.
WG1049AVPAK2	7 7/8" Dia.	8.1 in.²	2" FIP	1 1/2" FIP	6	36 lbs.
Includes gaskets and screws NOTE: Includes NSF listed covers.